Hydraulic Pump

مضخة هيدروليكية

A hydraulic pump is a mechanical source of power that converts mechanical power into hydraulic energy 

POMPA INGRANAGGI NPGH SX ISO

FAMILY DESCRIPTION
Autocompensated one-way cast-iron pumps for heavy-duty, displacements from 63 to 150 cc – 4-hole Flanging ISO 32×36 – Side intake, side, and rear delivery
OPTIONAL: bronze thrust plate

Hydraulic Pump Service in Dammam

What Are the Different Types of Hydraulic Pumps?

There are three main types of hydraulic pumps that you will encounter — piston pumps, vane pumps and gear pumps.

3 Types of Hydraulic Pumps

• Piston Pumps: Piston pumps are the most common and also the most capable of complex jobs. These are the hydraulic pumps you are most likely to find in manufacturing situations. They are the pumps you will use in high-pressure applications. A piston pump is a positive displacement pump that uses a high-pressure seal working reciprocally with a piston to move water. This configuration allows them to operate under high pressure without noticeably affecting the flow rate.
• Vane Pumps: These are less common and more straightforward pumps that you can use for lower-pressure applications with high flow rates. Vane pumps are positive displacement pumps that can work with a number of different vanes, including flexible vanes, swinging vanes, rolling vanes, external vanes, and sliding vanes. As the rotor of the motor rotates, the vanes sweep liquid to the opposite side of the cavity inside the engine and squeeze it through discharge holes in the cam.
• Gear Pumps: This is the most basic hydraulic pump you can use. You will typically use this pump for single, basic applications. Gear pumps work by using two gears that mesh to displace water. The gears rotate together, creating suction as they separate, which draws water into the pump — water it then displaces when the gears mesh together.

Common Hydraulic Pump Issues

The most common problem you will encounter with any hydraulic pump is wear. Like all mechanical parts, hydraulic pumps wear out eventually with use. Contamination and heat issues are the most typical cause of premature wearing-out when it comes to hydraulic pumps.

Hydraulic Pump Service in Dammam

HYDROTECH specializes in repairing hydraulic pumps, motors, and valves from leading manufacturers.

Proudly, an authorized Danfoss Power Solution reseller and always using genuine parts, in our repairs, we service all brands such as:

• Sauer Danfoss
• Eaton
• Vickers
• Kawasaki
• Bosch
• Rexroth

• Komatsu
• Parker
• Caterpillar
• Denison
• Linde

We know how important it is to get your hydraulic systems back up and running in proper working conditions.

Hence, we deliver repaired pumps and motors only after using a state-of-the-art testing rig at the standards-setting of the manufacturer and providing repairs with test reports backed up by our warranty.